I wanted to add a few more tabs to the Drawing workflow and it was only allowing me to add one.I created another workflow and was allowed to add more tabs with no problem.My question is:Is there a maximum number of tabs you can have under each workflow. It seems to be 12.
ThanksCraig
That worked. Thanks very much. Up and running now.
If there is an error in defining a button and/or group ( some component of the tab), then the tab will not display. Since you have one that is OK, try to make another tab with the contents of the working tab. Then replace the "working" button with the definition of the button from the non-working tab - if the tab disappears, then the button is the problem. If that works, then replace the Group...
Answer Verified By: cswnow
WWE_CUSTOM_RIBBON.dgnlib
Still not working. See and you can see the Connect Services tab disappears after the custom tabs I've inserted. Yes I did insert a tool under WWE 2, still no luck. I will upload the .dgnlib file
I have also tested at Organizational level and again no problem adding additional Tabs.
Could it be that your 12th Tab has a 'Visibility' property defined for it or group / tool underneath ?
For example the Visibility may be set to Is3DModel and thus if your in a 2d DGN file this will not be visible, but OK in a 3d DGN.
If still an issue may be you could post your dgnlib for review.