Preset upon opening User: Project: and Interface:

When Using the AutoRun.MVBA is it possible to set these Item to  a specific setting? Jut the way I normally run my Micro-station.

Of course they can all be set manually. Would be handy if it is not a lot of trouble or a big problem, I have searched for an article on this ? but 

I failed to find one on these 3 items. be a handy time saver if possible?

Parents Reply
  • I had tried the  "C:\Program Files (x86)\Bentley\MicroStation V8i (SELECTseries)\MicroStation\ustation.exe" /?

    Well Microstation never loaded again. When it tried to open it would appear to jump to dos, flash a black screen and then nothing

    I tried a bunch of things to get it back, modified the line and remove the /?, WRONG. Reboot the whole maching, WRONG AGAIN

    I then removed all short cuts and went int the All Progrmas >Bentley>MicroStation V8i (SELECTseries 3)>"C:\Program Files (x86)\Bentley\MicroStation V8i (SELECTseries)\MicroStation\ustation.exe" double clicked and the same results

    Tried using backup to the Program Data restore, WRONG. So finally had to do a complete restore. Drives and Partitions

    I was up and running but lost a lot, 7 day old Backup. Any suggestions to a novice?

    Version: MicroStation V8i SS 10

    RJB Phillips III (Richard) Praise the Lord for His Mercy and grace in Christ Jesus