APM performance affected due to logging set to Trace category.
Here is what the EXCESSIVE logging setting looks like:
If the logging is set to Trace, excessive logging happens for each click and get captured in Live Log Viewer.
This causes to slow down the performance of APM. If any performance issue is encountered, there can be chance that logging rule is the issue. It is always advisable to keep logging in Error category, to avoid performance issue due to logging.
Note: Adding a logging category to Trace could be valuable and was probably done for a reason, but it eventually should be disabled, or changed from Trace to Error.
See Also:
https://communities.bentley.com/products/assetwise/asset_performance_management/f/assetwise-apm-internal-training-forum/181327/is-logging-slowing-you-down