Problem
Cameco reported one issue about the data upload for the indicators. When the customer is creating one indicator when the time-frequency is higher than 47 years the system is not accepting (error msg below). Just indicator with a frequency lower than 47 years is working, Customer created the frequency "opportunity-based" and are using this frequency higher than 47 years. Do we know if this a limitation of the system (no higher than 50 years) or is it just a configuration step? Please, see the attached pictures below.
Verified Answer: RE: APM Frequency Setting Issue - Indicators by Gary Willis
We have encountered errors on dates way in the future in the past, but I don't recall how far in the future the date had to be for the problem to occur. If I remember, the error occurred on degradation tracking where end of life for an asset or indicator was far in the future.
The error appears to be related to financial periods. Are there financial periods (months and years) out to 2067 and beyond
Question: RE: APM Frequency Setting Issue - Indicators by Vitor Duca
Gary Willis, I checked the financial period and we have a calendar available for later than 2067. See pic below.
Nastaran Adeli do you remember any special change during the first set up for Cameco that could be causing this?
Not sure what could be the cause of this.
Question: RE: APM Frequency Setting Issue - Indicators by Gary Willis
The screen shot shows years. Are there also months out that far
Hi Gary, you found the issue. For the months we just have up to 2067. For years and quarters, we have far beyond.
Thanks a lot for your support and attention to this subject.
Months - up to 2067
Quarters - far than 2067...OK