You are currently reviewing an older revision of this page.
A revision rule is set to control the fixed list of Revision which will take place. A rule is set which includes the masks which is similar to the document number mask that is defined in the object templates. When objects are created or revised based on the template the revision rule is applied to each new and subsequent revision.
Revision Rules can be set through the eB Director within the Maintain List Values section of the System Administration tab in Director.
Revision Rule Sets has following fields which is defined in the below table:
1) Rule Set Name
Unique identifier for the Revision Rule Set. Can be up to 100 characters.
2) Description
General description of the rule set. Can be up to 255 characters.
3) Rule Syntax
Defines the rules for auto revision. Can be set max 2000 Characters
4) Enforce Pattern
By selecting this check box it force selection of the next revision from the list of available revisions in the pattern
5) Use Next
By selecting this check box it forces selection of the next available revision value in the pattern
A Revision Rule Set can contain four types of rule:
Certain combinations of these four are also permitted. Rules in the rule set are separated by semicolons.
The range syntax is used to specify a minimum and maximum value of revisions. Multiple ranges can be combined as shown in the example
RANGE[{000|999}] it produces these Revisions
000,001,002.........
The second available syntax for a revision rule set is a numbering mask, similar to a document number mask.
Example Mask: A-## it produces these Revisions
A-01, A-02, A-03..............
A fixed list contains all available revisions for an object separated by semicolons.
Example FL: 0;01;02;03;04;05;06 it produces these Revisions
0,01,02,03,04........
The pattern syntax provides the ability to have repeating version numbers with one or more masks.
Example Pattern: {#.A|#.B|#.C|#CX} it produces these Revisions
1.A, 1.B, 1.C,1.CX, 2.A, 2.B........