Inspection upload failure (from MCP to Exor MAI)


	Applies To

	Product(s):	Exor Maintenance Manager
	Version(s):	04.05.00.00
	Environment:	N/A
	Area:	Loaders - Inspection
	Subarea:
	Original Author:	Bentley Technical Support Group

Problem

On uploading inspection file into EXOR an error occurs: “The error is Sequence 60, Error No. 9524
Error Details D, K, L, M or N record must follow a J record:” it happens when “Create quick feature” is used for defects
creation in MapCapture (MCP). Using “Create Simple feature” for defects inspection (in MCP) everything is fine.

Solution

Make sure that all mandatory records for defects are created in an inspection file (this file was exported from MCP in
RMM_detailed_inspetion mode). In this case, when “create quick feature” is used to create defects in MCP, only “I” and “J” records are created for every defect. It is not enough.

We recommend you, to create a new project in MCP then to set some MCP settings and only then import PED and shape file(s) for data creation into MCP.

Before, PED and shape files were imported into your new project set these options in MCP:

- Options (on main menu toolbar)/Settings/System/Application/General set “Use BoQ and WoL “ to False and “Pre-Load BoQ Items” to True.

- Options (on main menu toolbar)/Settings/Export/Options set Export Permanent (Immediate/Tepmorary) Actions to True.