You are currently reviewing an older revision of this page.
User received an Initial Notice which declared a Type 4 Street and the notice was loaded without an error.
TMA Works should only reference type 1 or 2 streets from the NSG gazetteer, as per EToN regulations.
TMA Manager has validation in place that doesn’t allow a TMA user to select a type 3 or 4 street for a new works record, however other software appears to allow them to be used. When a user enters a new works record in TMA manager, type 3 and 4 streets are not seen in the street selection form, even if they are added to a street group.
When notices declaring a type 3 or 4 street are received they are loaded by TMA Manager with the following warning attached:USRN defined on notice must be of NSG Type 1 or 2
By default this validation message is set to a warning to allow the notice to load regardless. The software does this so that a street authority doesn’t miss seeing the notice for coordination or inspecting the works etc.
If you don’t want notices against type 3 or 4 streets to load then you should change this validation to be an Error rather than a Warning. To do this see form TMA2050 Notice Warnings and edit warning number 151.
Product TechNotes and FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!