| Applies To | |||
| Product(s): | Exor TMA Manager | ||
| Version(s): | 4.3.0.0 | ||
| Environment: | N/A | ||
| Area: | N/A | ||
| Subarea: | N/A | ||
| Original Author: | Bentley Technical Support Group | ||
Problem
When creating a new works and then send the initial notice, a proximity validation warning was shown to say that the coordinates were more than 250 meters from the street, however the Not Schedulable flag was not automatically ticked on the phase record.
Solution
The Not Schedulable flag will only be ticked if received notices fail the proximity validation. This means that Works/Notices which are entered and issued from the same system will not have the Not Schedulable flag ticked if they fail the proximity validation.
See Also
External Links
Bentley Technical Support KnowledgeBase
Comments or Corrections?
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!