Unable to select alignment as Cross Section Path element

Hi all,

Is anyone else having problems selecting an alignment for use as the path for creating cross section named boundaries.

No matter what I do I get the invalid element symbol come up on my cursor whenever I try to use it. I have tried it using complex elements I have just created and imported geometry. The elements have active profiles and are featurised as "Baseline Geometry" - am I missing something?

Parents
  • We had some issues with this in the EAP releases, which we'll have addressed in the Commercial Release. You can try this ... I notice that you have the "default-3D" model referenced to the 2d, so it may be trying to pick the 3D baseline. Turn off the 3D reference and try it again.


    This is a test

    Answer Verified By: Mark Shamoun 

Reply
  • We had some issues with this in the EAP releases, which we'll have addressed in the Commercial Release. You can try this ... I notice that you have the "default-3D" model referenced to the 2d, so it may be trying to pick the 3D baseline. Turn off the 3D reference and try it again.


    This is a test

    Answer Verified By: Mark Shamoun 

Children