Customizing the section at End girder

Dear supporter,
I study to use Leap Conspan with I section girder; normally, the cross section of this type of girder has the difference from middle and end position (end cross section is bigger than middle one). I could not found any function to describe this change.
Pls show me if there are any function for this requirement.

Thank and regard,

Parents
  • Dear Nguyen,

    As per your question , it looks like there is a change in cross section along the length of the girder.
    Currently it is not possible to model changing cross section along the length of the girder in Conspan.
    Once the cross section is defined in library then the cross section remains same throughout the length of the span.

    If this work around solutions works for you then I could suggest you to use an average cross section .

    Please let me know if you need any additional information.

    Thanks & Regards,

    Vinay
Reply
  • Dear Nguyen,

    As per your question , it looks like there is a change in cross section along the length of the girder.
    Currently it is not possible to model changing cross section along the length of the girder in Conspan.
    Once the cross section is defined in library then the cross section remains same throughout the length of the span.

    If this work around solutions works for you then I could suggest you to use an average cross section .

    Please let me know if you need any additional information.

    Thanks & Regards,

    Vinay
Children
No Data