• State Verified Answer
  • Replies 3 replies
  • Subscribers 29 subscribers
  • Views 1863 views
  • Users 0 members are here

Customized output reports

triezenbergj
Offline

Is there any way to get a customized output in CONSPAN or LEAP Bridge? For example if I only want to print stresses at the same 4-5 locations along with some other outputs.  Is there any way to accomplish this?

Parents
  • 0 Offline
    Hi ,

    It is possible to customize the output results but there are some limitations .
    If you want to print the stresses at any particular location (for example. Only at 0.4L , 0.5 L or 0.6L ..) ,Then its not possible.
    When span and beam number are selected and if you want to print the stresses for that span and beam then
    the program will print the stress information at all point of interest ( from 0.1L till 1L) along the span.

    Please let me know if you need any additional information.

    Thanks,

    Vinay
Reply
  • 0 Offline
    Hi ,

    It is possible to customize the output results but there are some limitations .
    If you want to print the stresses at any particular location (for example. Only at 0.4L , 0.5 L or 0.6L ..) ,Then its not possible.
    When span and beam number are selected and if you want to print the stresses for that span and beam then
    the program will print the stress information at all point of interest ( from 0.1L till 1L) along the span.

    Please let me know if you need any additional information.

    Thanks,

    Vinay
Children
No Data
Communities
Support and Services
Training and Learning
Social Media