Customized output reports

Hi ,

It is possible to customize the output results but there are some limitations .
If you want to print the stresses at any particular location (for example. Only at 0.4L , 0.5 L or 0.6L ..) ,Then its not possible.
When span and beam number are selected and if you want to print the stresses for that span and beam then
the program will print the stress information at all point of interest ( from 0.1L till 1L) along the span.

Please let me know if you need any additional information.

Thanks,

Vinay

How do you output stresses at a POI? I'm not sure how to specify those points.

Thanks in advance.

Hi ,

As I have mentioned before. Currently it is not possible to get the output of stresses at any particular POI (for example. Only at 0.4L , 0.5 L or 0.6L ..)  . You need to go to PRINT --> Select the span , Beam and then select Positive Envelope stresses or Negative envelope stresses and the program will show the stress information at all the 10th points . The customization is limited to particular Span and beam number.

Thanks ,

Vinay