RC Pier - EV & EH loads

Offline David S over 8 years ago

I am designing an abutment using RC Pier. Under the Loads tab, I input/generate EV & EH loads. However, when I run an analysis and review the load combinations the vertical or horizontal earth loads are all "0". It appears that these loads are being applied based on the footing design. I am wondering why the loads are not showing up in the analysis.

Thanks.

Parents

0 Offline Vinay mysore Thu, Jul 16 2015 2:10 AM
Hi ,

This issue was found in V14.00.00.19 and this issue has been fixed in V15 and this version will be released in couple of weeks.
The only solution is to download the latest version (V15) from Bentley select server and rerun the analysis.

Please let me know if you need any additional information.

Thanks,

Vinay
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Offline Vinay mysore Thu, Jul 16 2015 2:10 AM
Hi ,

This issue was found in V14.00.00.19 and this issue has been fixed in V15 and this version will be released in couple of weeks.
The only solution is to download the latest version (V15) from Bentley select server and rerun the analysis.

Please let me know if you need any additional information.

Thanks,

Vinay
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 Offline Michael Mercado Fri, Aug 21 2015 10:17 AM in reply to Vinay mysore

What is the expected release date for V15? It currently is not up on the select server.
Thanks
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline Vinay mysore Mon, Aug 24 2015 2:01 AM in reply to Michael Mercado
Hi Michael ,

There is a delay in the release of V15 . I shall email you the installer file with bug fixes.

Thanks ,

Vinay
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel