• State Suggested Answer
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 2014 views
  • Users 0 members are here

OBM - Steel Girder issues

EricG
Offline

I'm having a couple issues placing steel girders. 1) I'm getting a 3" haunch even though I have haunch "unchecked" when specifying my girder. 2) My girder is W36x135 which should be 35.6 inches. But it is measuring 43.6 inches. Please see the image below. Thanks, Eric...OBM ver. 08.11.09.211

Parents
  • 0 Offline
    Once again I have an answer to my own question regarding the beam size. I now realize I didn't check the "Apply To All Beams" box. So only the first beam was correct (W36x135) but the rest of the beams were coming in as the default (W44x290). I'm still getting a haunch though and it's coming in on the level "OBM GirderConcrete". I can set it to something real small like .001 but still shouldn't it not be there at all if I've "unchecked" it?

    Thanks,
    Eric
Reply
  • 0 Offline
    Once again I have an answer to my own question regarding the beam size. I now realize I didn't check the "Apply To All Beams" box. So only the first beam was correct (W36x135) but the rest of the beams were coming in as the default (W44x290). I'm still getting a haunch though and it's coming in on the level "OBM GirderConcrete". I can set it to something real small like .001 but still shouldn't it not be there at all if I've "unchecked" it?

    Thanks,
    Eric
Children
Communities
Support and Services
Training and Learning
Social Media