LEAP RC PIER CAP INVERTED TEE, I CANNOT DEFINE TWO BEARING LINES,

RE: LEAP RC PIER CAP INVERTED TEE, I CANNOT DEFINE TWO BEARING LINES,

Vinay mysore — Tue, 06 Jun 2023 06:21:32 GMT

Hi Brandon,

I tested this issue in V19.02.00.33 and for Inverted T beam i was able to input 2 lines of bearing.

I modeled the pier in the standalone module of LBC. i did not user ABC wizard to model the inverted T beam pier.

Users should select double option under bearing line.

Also V19 is a very old version and i would suggest you to download the latest version of Open Bridge Designer.

The current version of LBC is V22.00.04.34

I hope it helps

Thanks,

Vinay

Brandon Brooks — Fri, 02 Jun 2023 19:03:30 GMT

I'm having this same issue and I'm using V19.02.00.33. Was there any resolution? Email bbrooks@mbakerintl.com

Vinay mysore — Tue, 23 Oct 2018 10:33:42 GMT

I tested this issue in V18.01.00.16 and I couldn't replicate this issue.

In the first test I used ABC Wizard to model multiple column with inverted T cap and 2 lines of bearing and the program modeled correctly.

In the second test I used ABC Wizard to model single column with inverted T cap and 2 lines of bearing and the program modeled correctly.

In the third test I modeled only substructure with single column with inverted T cap and 2 lines of bearing and the program modeled correctly.

Please email me the file so that I can test it . My email ID is Vinay.mysore@bentley.com