No active profile when trying to add bridge

RE: No active profile when trying to add bridge

Mark Shamoun — Thu, 24 Sep 2020 11:20:10 GMT

Us too. We downgraded back to Update 8.1 to continue project delivery.

Looks like ORD interoperability has been broken in Update 8.2 unfortunately.

RE: No active profile when trying to add bridge

Peter Molnar — Wed, 23 Sep 2020 16:33:55 GMT

Has this been resolved? I am having the same issue. I am using the CONNECT Edition of ORD and OBM

RE: No active profile when trying to add bridge

Vlad Grigoras — Thu, 03 Sep 2020 13:36:28 GMT

Hi Eric,

Please send me your working file to me to have a look at it.

vlad.grigoras@bentley.com

RE: No active profile when trying to add bridge

MarcosBeier — Wed, 02 Sep 2020 22:41:40 GMT

Verify that the Profile set as Active is defined for the selected Alignment and stationing and not somewhere else

RE: No active profile when trying to add bridge

Steve Willoughby — Wed, 02 Sep 2020 14:32:16 GMT

I beleive the alignment and profile need to have a name as well.

RE: No active profile when trying to add bridge

Eric Schluter — Wed, 02 Sep 2020 14:08:15 GMT

Steve. My ORD profile is set active, as you can see from the image below. I would like the bridge to use the ORD alignment and station.

RE: No active profile when trying to add bridge

Steve Willoughby — Wed, 02 Sep 2020 13:31:33 GMT

Eric ... an alignment can have one or more profiles. Unless one is set to be 'active' , no profiles are active. Make sure the designer using ORD not only set a profile but made it active as well. You probably do not want the requires road alignment toggle nor the use road alignment stationing toggle enabled either.

RE: No active profile when trying to add bridge

Eric Schluter — Wed, 02 Sep 2020 12:44:30 GMT

I am also experiencing this same issue, but I'm running the latest version of both OpenRoads Designer (10.8.1.33) and OpenBridge Designer (10.8.2.10). I know the alignment in ORD has an active profile (set by constant elevation), but when referenced into OBM it tells me there is "No Active Profile". How do I remedy this? Any help would be very appreciated. Also my data is hosted in ProjectWise (10.00.03.167).

RE: No active profile when trying to add bridge

Marcelo F. DaSilva — Tue, 12 May 2020 12:39:27 GMT

not sure how your comment will help the issue.

RE: No active profile when trying to add bridge

Jackie Petty — Tue, 12 May 2020 09:30:36 GMT

[deleted]

RE: No active profile when trying to add bridge

Marcelo F. DaSilva — Sun, 10 May 2020 14:13:38 GMT

I have had the same issue and for me it was compatabiility issue. I had created the alignment using geopak (v8i series 10) but openbridge version is the Connect edition (10.04.00.747).

Once I created the alignment using ORD (CE). Problem was solved.

RE: No active profile when trying to add bridge

Vlad Grigoras — Thu, 07 May 2020 09:21:47 GMT

Most likely you did not assign the profile as the active profile for the selected alignment.

If assigning the active profile does not work for you, please send me the file at vlad.grigoras@bentley.com and I will have a look at it.