What is the quickest way of assigning soil springs on pile nodes?
Hi Manuel Naval,
The quickest way of assigning soil springs on pile nodes is not thru the GUI, but in an input text file. The programmable ASCII will allow you to create routines for repetible elements in the .tcl format.
Marcos Beier
Senior Technical Support Engineer
RM Bridge - OpenBridge Designer RM Bridge is now an integral part of OpenBridge Designer CONNECT Edition as Bentley’s solution for supporting the design and engineering tasks in bridge construction for all types of bridges and construction… Last edited 2 hours ago in LARS | LEAP | OpenBridge | OpenTunnel | RM > LARS | LEAP | OpenBridge | OpenTunnel | RM Wiki
Hi Marcos. Thanks for the reply. Do you have any example that can guide me? In addition to that, is going to be in the GP tcl or RM tcl? there should be a consistency between the two interfaces right? Your assistance is much appreciated.
Hi Manuel, Yes, at File\Examples\Demo Examples & FAQ\Using user defined flexibility & Stiffness matrix you will find the demonstration of this feature with files and on document about it.
The .tcl files shows three different variants for the same mode with pile foundations:
This additions will be at the Analyzer (RM) .tcl