Open Bridge Modeller to LEAP Concrete Bearing Elevation changes drastically

RE: Open Bridge Modeller to LEAP Concrete Bearing Elevation changes drastically

Vlad Grigoras — Fri, 14 May 2021 09:13:09 GMT

Hi Nathan,

Have you looked at the tutorials for OBM and OBD from the bellow link?

RE: Open Bridge Modeller to LEAP Concrete Bearing Elevation changes drastically

Nathan Boswell — Thu, 13 May 2021 14:43:44 GMT

I ended up just adding a beam and removing one beam through beam layout. Retyped the beam lengths and the middle one disappeared... Went to beam groups then hit beam definition and it brought in the wrong beam in the same place. Reassigned the beam and material and now the model works. Just started with this program this week, and it's very buggy with beams and bearing lines just randomly disappearing. Now the concrete model is correct at least, but haven't tried finishing the design and sending the reinforcement back to OBM.

RE: Open Bridge Modeller to LEAP Concrete Bearing Elevation changes drastically

Daniel Mundie — Thu, 13 May 2021 14:07:27 GMT

Nathan,

I had this same issue yesterday. I ultimately just deleted all of my beams and then placed them again and it seems to be okay now, but I don't know what caused the issue in the first place.