RE: Multiple Units issue in Leap Steel Bridge

Benji Michael Chit Khin — Wed, 20 Oct 2021 19:51:23 GMT

Vinay,

I tried the new version as well as using the standalone. It still didn't bring in the girders.

I do think I know what might be causing the issue. So both bearing lines for Bent 1, upstation and downstation are in the Simple Span Unit and in the 2 span continuous unit there isn't any bearing line for bent 1. But from what I have tried so far, I can't model the downstation bearings in the single span unit and the upstation bearings in the 2 span unit. It seems that once you place bearings on a support line, you can't place bearings on the same support line in a different unit.

Have you seen this issue before?

Thanks!

RE: Multiple Units issue in Leap Steel Bridge

Vinay mysore — Tue, 19 Oct 2021 05:11:17 GMT

May be it was an issue with the older version , first thing i would suggest you to install the latest version and try to send the second unit to LBS and see if it works.

If you are still facing the issue then please create a service request and the technical support person will help you.

https://apps.bentley.com/srmanager/