Custom barrier using PLACE PATH

RE: Custom barrier using PLACE PATH

Colby Gallagher — Wed, 16 Mar 2022 22:26:50 GMT

I've also had some issues with using custom barriers and the place path tool. From memory you need to make sure your cell is a graphic cell (not parametric) and is made of smart solids only. I was having the same issue where it wasn't showing up for me.

RE: Custom barrier using PLACE PATH

John Patrick Valdez — Wed, 16 Mar 2022 10:54:26 GMT

Hi Vlad,

Thanks for the response. I send you an email.

thanks

RE: Custom barrier using PLACE PATH

Vlad Ursachi — Wed, 16 Mar 2022 07:10:19 GMT

Hi John,

Please attach your AuxLib.cel library here, or send me an email with it. (vlad.ursachi@bentley.com)

RE: Custom barrier using PLACE PATH

John Patrick Valdez — Wed, 16 Mar 2022 00:08:43 GMT

Hi Sri,

Thanks for the response. The "Barrier_Handrail" also works for me. That cell is already on the AuxLib.cel.
The barrier that I created in the AuxLib.cel and trying to use is the "Barrier_withTail". When I try placing it, its not appearing on the model.

RE: Custom barrier using PLACE PATH

Sri — Tue, 15 Mar 2022 18:11:00 GMT

You can use the PLACE PATH to place a series of barrier cells. Simply specify the spacing (typically the length of the cell unit) and they will be added. If you are not able to place the specific cell you created, can you check the one above "Barrier_HandRail" from your list. This is the cell I tried.