Hello,
When I first open the Substructure Module there is a CE load that is imported from LBS. This load only has a couple force in the Y direction acting at the exterior bearings.
However, when the Auto Generation tool is used, lateral forces and a moment are seen.
So my question is - do I need to remove the CE load imported by LBS and use a manually generated one instead?
Additionally, I have seen a lot of responses on this forum indicating that the load case dependencies can be turned off. For example, I have seen many responses saying that only one braking force is needed.
So, my second question is whether this same approach is recommended for CE forces - do I only need one or should there one per LL case?
Thanks