Hello there.In OpenBridge 2022 R1，I would like to place a barrier along P_4 point of the deck.But when placed,barrier can't follow P_4 point finally.It seems the work point of barrier always recognizes the upper surface of deck,just like following pictures and video.
However barrier can be placed correctly following the selected point of deck in OpenBridge Modeler CONNECT Edition - Update 9,like the following picture. Is it a bug of placing barriers in OpenBridge 2022 R1？
Here two models with different OBM versions are uploaded as attachments,since I hope this problem can be solved as soon as possible.Thanks!
2148.Placing barriers in OpenBridge Modeler CONNECT Edition - Update 9.dgn
5037.Placing barriers in OpenBridge Modeler CE.dgn
For now a possible work around is to introduced one vertical offset equal to the deck thickness. Please se below:
Hope it helps.
Ana Carla Peres
Senior Technical Support Engineer
Bentley BrIM
Thank you for your answer.It helps.
Vertical offset can solve some simple problems, but it will lead to unnecessary problems and troubles in complex situations.For example, when the deck is a inclined thin strip, the barrier cannot be placed along with the specified point, and offset cannot solve this problem well because of the deck having a rotation,as shown in the following figure.
This model is uploaded as an attachment.
Hope it can be fixed soon.Thanks.
Placing barriers in OpenBridge 2022 R1.dgn
Yes, you're right. I've checked and Defect 1004239.is still on the board for being implemented.
You can look at the new features in the below link:
communities.bentley.com/.../coming-soon---openbridge-modeler-connect-edition-2022-release-2
Six months have passed.And hope it can be resolved as soon as possible