Has anyone else had this issue? I can run an analysis and nothing gets flagged in the "Under Design Report", but after looking at the Strength V Limit State reports there are failing members in Shear. Also I have attached an example picture of what the shear diagrams look like and they look like something isn't running correctly in the Strength V limit state compared to the Strength I limit state. Thanks in advance for the help.
I tested this issue in Tutorials 1 and i found the shear diagram to be same for both Strength I and Strength V.
If this is related to any particular file, then please email me the file so that i can this issue on my machine.
My email is "Vinay.Mysore@Bentley.com".
Also, while emailing, please email me some screenshots showing the incorrect shear diagram as it will help in my investigation.
I have seen something similar to this in the past, and also the reverse (things failing in under design report, but passing in the detailed report). You have to be extremely vigilant when looking through the reports unfortunatley. One way to make it easier is to export to excel and use the column filters.