I have a multi-span bridge that requires a barrier rail transition to an adjacent span that has a larger deck width than the preceding span. I used the horizontal/complex geometry/complex by PI to draw the alignment for the barrier to follow. I tried to use the alignment to guide the location of the barrier, but it introduced unwanted curves in the barrier, which do not follow my custom alignment. How can I force the barrier to follow my alignment without the curves being present? Please see below. I would like the barrier to follow the red lines shown under the grey barrier lines. The other set of red lines are for another barrier to be placed when this matter is resolved.
Brian, such sharp angles on the transitions are not currently handled well by OBM. It would be better to stop the barriers on either side, and connect manually with solid modeling tools.