• State Not Answered
  • Replies 3 replies
  • Subscribers 29 subscribers
  • Views 279 views
  • Users 0 members are here

LEAP Steel Tub Girders ignores bottom flange.

Ariatna Jacome
Offline

Modeling a 2 spans Twin Tub Girder and showing the bottom flange on graphics but at the moment to run analysis, LEAP ignores the last section.  I have tried changing supports, thicknesses of flanges and also created a new model from scratch.  

        

Parents
  • 0 Offline
    Hi Ariatna,
     
    Good Morning,
     
    I tested this issue in the soon to be released internal development version V22.00.04.26 and still the program was showing no
    Bottom flange in the FEM model – Solid fill and the program was showing incorrect deflection diagram.
     
    I shall try to recreate the file from scratch in the internal development version V22.00.04.26 and will try to run the analysis.
    I shall let you know my findings.
     
    Thanks & Regards,
     
    Vinay
     
     
Reply
  • 0 Offline
    Hi Ariatna,
     
    Good Morning,
     
    I tested this issue in the soon to be released internal development version V22.00.04.26 and still the program was showing no
    Bottom flange in the FEM model – Solid fill and the program was showing incorrect deflection diagram.
     
    I shall try to recreate the file from scratch in the internal development version V22.00.04.26 and will try to run the analysis.
    I shall let you know my findings.
     
    Thanks & Regards,
     
    Vinay
     
     
Children
No Data
Communities
Support and Services
Training and Learning
Social Media