Loads imported from LBS to substructure design/analysis

My previous 3-span steel superstructure worked fine. No problems. Now I'm working on a single span steel bridge, and when I open substructure design/analysis there are no values for live loads... all zeroes. And it won't let me generate them. All other loads are imported properly. Anyone know what's going on? I've tried everything. I even started over with a completely new file but got the same results. The live load reactions show up in superstructure so I know they've generated.... just not being exported to substructure...

Parents
  • Hello, The issue you're experiencing with the live load values not appearing in the substructure design/analysis of your single span steel bridge could be due to a configuration or software-specific problem. Ensure that the proper settings for live load calculation and exporting are selected in the substructure design module. Double-check the load generation process in the superstructure design module to confirm that the live loads are being generated and assigned correctly. It's also important to establish and verify the correct load paths between the superstructure and substructure. If the problem persists, consult the software's documentation, user guides, or support team for specific troubleshooting steps related to exporting live loads to the substructure.  MyGeorgiaSouthern Portal

Reply
  • Hello, The issue you're experiencing with the live load values not appearing in the substructure design/analysis of your single span steel bridge could be due to a configuration or software-specific problem. Ensure that the proper settings for live load calculation and exporting are selected in the substructure design module. Double-check the load generation process in the superstructure design module to confirm that the live loads are being generated and assigned correctly. It's also important to establish and verify the correct load paths between the superstructure and substructure. If the problem persists, consult the software's documentation, user guides, or support team for specific troubleshooting steps related to exporting live loads to the substructure.  MyGeorgiaSouthern Portal

Children
No Data