I have a roadway project that is shoulder widening, bridge approach improvements, and bridge replacements. I have an alignment (from roadway design) where the existing ground profile is set as the active profile, for the shoulder widening. There are 3 bridge crossings that have profiles created in the roadway alignment file for the approach work and the bridge replacements; they are not set to active. The roadway models in the approach areas are modeled using the independent 'bridge' profiles as the basis of their roadway model.
My question...is there a way to model an OBM bridge using these independent profiles that are not set to active?
OBD 10.10.00.26OBM 10.10.00.786
Thanks,
Jamie
An OBM model is built on the alignment and the active profile. One cannot model the model on a independent profile.
Frequently Asked Questions - LARS | LEAP | OpenBridge | OpenTunnel | RM Wiki - LARS | LEAP | OpenBridge | OpenTunnel | RM - Bentley Communities
Thanks Dilip...appreciate the reply. This could be a rare occurrence where the roadway profiles are set up like this, but wondering if this could be a worthwhile enhancement to OBM for the future?