I am working in OBD v10.10.20.34 and have a question about shear/moment output tables for rating the bridge. The rating output tables only give me the rating factors. The client requires that shears and moments at 10th points for DL, other permanent load (example - prestress) and each rating vehicle is shown on the plans. Is there a way to get this info from the beam rating?
In Rating output table only the rating factors are shown for Moment , Shear , Conc. Tension / Compression........ .
The Moment , Shear and stress values are not shown in the Rating output table.
Once the Beam design is done generally this information is obtained in BEAM TAB --> results --> Beam Specific Output --> Shear / Moment envelope , Positive Envelope Stresses , Vertical Shear , Ultimate moment.
Please check Rating related bentley communities link for your reference.
https://communities.bentley.com/products/bridge_design___engineering/w/bridge_design_and_engineering__wiki/24559/rating----bearing-location-for-shear
https://communities.bentley.com/products/bridge_design___engineering/w/bridge_design_and_engineering__wiki/16045/rating-for-the-design-lane-load