• OpenBridge Modeler Itemtype export

    Hi, I have seen some video which shows that Itemtype is attached to elements which can report a lot of element property within OpenBridge, by reading the wiki on this page I gathered itemtype information cannot be transferred to itwins, however, I…
  • SIG Virtual Workshop: OpenBridge - Using a BIM or Standalone Workflow in OpenBridge Designer

    OpenBridge Special Interest Group: Using a BIM or Standalone Workflow in OpenBridge Designer Host: Alex Mabrich, Senior Application Engineer, Bentley Systems, Inc. Date/Time: April 7, 2020 at 2 p.m. EDT Register Now This OpenBridge…
  • OBD - Point Controls for the deck

    Hello all, I am trying to apply point controls to my deck and it will not work. I've attached a picture of what the program tells me. I dont understand what over lap it is talking about. I made a new template with lanes of 2ft to see if…
  • OBM Deck Template with Offset Grade Line

    How does one set up a deck slab template when the profile is not located at the alignment? In my case the cross-sectional shape of the deck is shaped like a simple gable roof but the grade line is not located at the peak (where the alignment is) but rather…
  • Modelling Integral bridges in OpenBridge

    Hi OpenBridge Community, Has any body modeled any Integral or simi-Integral bridges in OpenBridge Modeler? Has any body come up with a method for producing a 'down stand' as shown below? Thanks Oliver
  • Which software platform is comparable to CSIBridge if not better?

    LEAP or RMBridge or STAAD pro.
  • LEAP Bridge V8i Release Enhancements

    LEAP Bridge v8.1.0 incorporates the following enhancements: • The ABC Wizard can now directly read in alignment, cross-section and profile information from LandXML files. The bridge model can now be generated very accurately directly utilizing…
  • LEAP bridge problems

    Hello all: I am having an extremely difficult time getting through my bridge design on LEAP bridge. Especially while working in GEOMATH and RC PIER. In GEOMATH: Problem #1: Back when I was trying to make minor adjustments to the geometry of the…