• [RM Bridge] stiffness Traveller of Main Girder

    hi all, I have a few questions as follows: 1. During the construction of cable-stayed bridges, does the Traveler of Main Girder stiffness model always have to be considered for cable-stayed bridges to increase the stiffness of Kn girders? 2. If…
  • Thermal cyclic loads

    I'm attempting to simulate how thermal loads may affect the backfill behind an integral abutment by deploying PLAXIS 2D. I modelled the concrete bridge deck as a Linear Plate element and included a prescribed displacement near the top of the abutment…
  • OpenBridge Modeler Itemtype export

    Hi, I have seen some video which shows that Itemtype is attached to elements which can report a lot of element property within OpenBridge, by reading the wiki on this page I gathered itemtype information cannot be transferred to itwins, however, I…
  • OpenBridge SIG: Learn How to Use Advanced Modeling Capabilities in OpenBridge Designer

    OpenBridge Special Interest Group Virtual Workshop: Advanced Modeling Capabilities in OpenBridge Designer Presenter: Alex Mabrich, User Success Manager, Bentley Systems, Inc. September 10, 2020 at 2 p.m. EDT Register Now The OpenBridge Special…
  • SIG Virtual Workshop: OpenBridge - Using a BIM or Standalone Workflow in OpenBridge Designer

    OpenBridge Special Interest Group: Using a BIM or Standalone Workflow in OpenBridge Designer Host: Alex Mabrich, Senior Application Engineer, Bentley Systems, Inc. Date/Time: April 7, 2020 at 2 p.m. EDT Register Now This OpenBridge…
  • SIG Virtual Workshop: Bentley Bridge - September 12, 2019 - You're Invited!

    Bentley Bridge Special Interest Group: Using Bridge Modeling After the Design Process Host: Alex Mabrich, Senior Application, Engineer Bentley Systems, Inc. 12 September 2019 - 02:00 P.M. EDT Register Now The Bentley Bridge Special Interest…
  • median between highway lanes

    Is there any provision of defining median or divider in a bridge model in leap ?
  • RC Pier

    When entering loads manually for a wall type pier, what is RC Pier referring to as cap loads? Is this the pile cap? Some load screens also have a tab for footing, so this does not seem to make sense. Is it the top of the pier even though a wall type pier…
  • Steel Tub-Girder in LEAP Bridge Steel

    Hello all, The LEAP Bridge Steel (LBS) is a great tool we utilized for steel I-Girder design in our office. But it is not possible to model steel tub girders even in the latest version (v10.01.00.05). Is there any future plan to make steel tub girder…
  • Is it possible to change a cross-section property (torsional constant) of a CS created in MODELER, without using "Beam, CS values" element type?

    Hello community, I am trying to edit the cross-sectional properties of the elements of a grillage model, in order to simulate the torsional stiffness of a multicellular deck. I have created the web sections using MODELER and assigned them appropriately…
  • RE: How to use RERESULT in RM Bridge TCL?

    Dear Sir, Great to hear from you, you have shared a useful information, but unfortuantely iam not able to understand the syntax, of the scripts you given, can u pls expalin in detail at least for import rm model rm9.exe -small –nohist -nowait -import…
  • Looking for approach to model retaining walls

    MicroStation is our CAD platform on a project whose scope includes modeling all proposed retaining walls. We've used LEAP in the past to model bridges, and InRoads to model face of wall, but we'll now need to go into more detail. As is characteristic…