• OTD: IFC Import doesn't work

    Hello, I am fairly new to OpenTunnel Designer and have the following problem: 1 week ago I imported a IFC4.3 underground model created and exported in Leapfrog (same company - so it should be compatible). Everything worked. This week I created a…

  • OpenTunnel Designer - Create Alignment

    I'm completly new to OpenTunnel Designer. I use Leapfrog to model the ground and import it to OTD as IFC. The very first step is to import an alignment. I have the Tunnelalignment as an Excelsheet with X/Y/Z for each station. As I found out the alignment…

  • Bentley Accredited Bridge Modeler: Basic Bridge Modeling with OpenBridge Modeler – Program Overview

    Review the material for accreditation by visiting the LEARNserver Advance your Skills and Career The Bentley Accredited Bridge Modeler Program is an official credential from Bentley Systems, Inc. that verifies you have the essential OpenBridge modeling…

  • OpenBridge Modeler Abutment Elevations

    When I place an abutment template using the elevation constraints the location measures correctly in MicroStation, however the Pier printout does not appear to follow the restrictions I set. This means my pile elevations are also printed incorrectly.…

  • Beams outside of Deck edge

    Hi, I am trying to Model a Steel bridge in OBM (Not too worried about analysis, just need a 3D model). Need to find out the best workflow. There are mainly 3 Questions . (Refer to the images below) 1. What type of Bridge I should pick at the…

  • OpenRoads & OpenBridge - Station Offset Report

    Hello all, Is there a way to obtain a station offset report in OpenRoads that includes the bridge decks which were created in OpenBridge Modeler? I have a collector with road corridors and bridges. I also tried using the Model detailing > 3D Elements…

  • OpenBridge Modeler - Clip Reference

    Hello all, I'd like to clip something to my bridge deck. I know you can do it in OpenRoads by going to Corridor Clipping --> Add clipping reference. Is there a similar tool in OpenBridge? I need a square hole in the deck for a bridge's column…

  • I want to download the LEAP Steel Bridge design

    Where could I find the link to download the Leap steel bridge modeling software? Thanks.

  • SIG Virtual Workshop: Bentley Bridge – March 14, 2019 – You're Invited!

    Bentley Bridge Special Interest Group Virtual Workshop: Bentley Bridge – March 14, 2019 at 2 p.m. EDT Topic: Enhancements in 3D Modeling from OpenBridge Designer Release 6 Host/Presenter: Alex Mabrich, Senior Application Engineer, Bentley Systems, Inc…

  • OBD - Point Controls for the deck

    Hello all, I am trying to apply point controls to my deck and it will not work. I've attached a picture of what the program tells me. I dont understand what over lap it is talking about. I made a new template with lanes of 2ft to see if…

  • OpenBridge Modeler vs OpenBridge Designer ?

    Hi I have wondered what the difference is between OpenBridge Modeler and OpenBridge Designer? Can anyone explain me the difference and why I should choose one from the other? Kind regards Ole

  • LBC Mild Reinforcement Floating above structure

    Hello, The bridge is curve prestressed with box beams and the mild reinforcement within the beams is floating above the bridge deck. Currently the issue just seems to be graphical. The model was intailly generated with the ABC modeler in version 18…

  • OBM Abutment Top of BackWall

    In a recent OBM video I see an option to have the abutment "BackWall" conform to the top of the deck. I think it would be more common to have the backwall under the deck. Is there an option or method to have the deck extend out over the top of the backwall…

  • Leap Bridge Precast Reinforced Concrete Channel

    Hi All, Can I do a bridge composed of reinforced concrete precast beam channels in Leap Bridge Concrete? None of these beams are prestressed on post-tensioned, so I want Leap Bridge to check it simply as reinforced concrete with steel rebar.

  • Bentley RM Bridge Enterprise CONNECT & Capabilities

    Dear Technical staff of Bentley RM Enterprise CONNECT Many Greetings I have just known about the Bentley RM Enterprise CONNECT software. I have some questions related to its capabilities as: 1- Can it does nonlinear analysis of bridges based on…

  • How to extract solid from Open Bridge Connect series deck element?

    Hello, I'm relatively new to Open Bridge Connect edition. I am working on a very complex bridge and as I can see there isn't a template for the substructure I need to model so I made the substructure by basic 3D modeling. To fit the substructure to…
Communities
Support and Services
Training and Learning
Social Media