You are currently reviewing an older revision of this page.
Document Type: FAQ Product(s): LEAP CONSPAN Version(s): All Original Author: Bentley Technical Support Group
Document Type: FAQ
Product(s): LEAP CONSPAN
Version(s): All
Original Author: Bentley Technical Support Group
ANSWER:
Yes there is an option in Conspan where the user can Neglect the Elastic Gains. Go to Analysis TAB à Design Parameter option à Resistance Factor / Losses à Compute losses using “ Neglect Elastic Gains” .
Detailed Hand calculation example on how to compute Adjustment for Elastic Gains is available in Tutorials --> Hand Calculations --> Tutorials 5 --> Page HC-37 .