What's New in OpenBridge Modeler CONNECT Edition, 2018 Release 2 (August 2018)

This topic summarizes the new enhancements in OpenBridge Modeler CONNECT Edition, 2018 Release 2.

The version # of this release is 10.04.00.47.

Primary Enhancements:

• Select footings and abutments, identify terrain and compute earthwork excavation volumes. Generate quantities report including cost.
• Improve model geometry accuracy by manual input of concrete haunch thickness measured at CL of beam, at both start and end of beams.
• Reintroduced an option to rotate concrete beams, either automatically to follow slope of deck or based on user input angle.
• Improved handling of common piers between units is now supported, including automatic bearing seat height computation.
• New option to orient cross frames and stiffeners normal to top flange on steel girder bridges.
• Option to place MicroStation cells as custom piers. Assign analytical properties for transfer to analytics.
• Several changes to improve placement of auxiliaries, to make the process simpler, and similar to options from the V8i version.
• Additional tools added for Clash Detection (under Utilities), Superelevation (under Civil) and Terrain tools (under Civil)

Additional Enhancements:

• Under Beam Report, OpenBridge Modeler now shows the haunch elevation and thickness at the center, left and right ends of the beam.
• Several new Texas DOT beam sections have been added. X-Beam, Decked Box beams etc, including transfer to analytics.
• When the tendons are brought in from RM Bridge to OpenBridge Modeler, the length of the tendons is shown in properties.
• New input for simpler, faster Balanced Cantilever Segmental bridges.
• Lines showing positions of Crossframes and Stiffeners are drawn at elevation 0. Could be useful for plan production.
• Show decoration option to draw transverse lines showing position of Deck Elevation Report points at elevation 0. Markers are drawn in 3D, at the appropriate deck elevations for verification.
• The paths to LEAP Bridge Concrete and LEAP Bridge Steel can now optionally be defined in the config file.
• Availability of new releases now shows up in the CONNECTION Client
• CONNECT Licensing Adapter is now included with OpenBridge Modeler installation.
• Platform Updates:
  • Updated to MicroStation, Power Platform 10
  • Updated to Civil - OpenRoads Designer, Update 4
  • Option to Install LumenRT Designer CONNECT Edition Update 10