You are currently reviewing an older revision of this page.
In RM Bridge CONNECT Edition at Modeler inside the Piers definition there is a new option for inserting all substructure with meso-structure and infrastructure at once: the Substructure wizard.
Right click on the Piers to have access to Substructure wizard, as shown below. There you can define and assign the elements type including footings and piles.
TIP: To include the infrastructure in elements created by the New Wizard Substructure in Modeler you also need to set, at the Footings definitions the column In Use to Yes, as shown in the screenshot below. You need to double clic on the No default option to modify it accordingly.
Select between Abutment, DropCap, HammerHead, Wall and Columns Support types associated to the Main Girder. Add and Modify Station, Position, Transversal Offset, Skew and Longitudinal and Lateral supports. Use the graphical input, as highlighted below in red.
Select each of the Tabs to modify the Elements geometry, ends, Footings and Connects.
Then select the Material and Numbering schema for all the elements that will be created and verify the new created elements in the list and at the 3D View.