CSB - Modeler

MarcosBeier — Thu, 05 May 2022 16:40:50 GMT

Current Revision posted to LARS | LEAP | OpenBridge | OpenTunnel | RM Wiki by MarcosBeier on 5/5/2022 4:40:50 PM

A Cable-Stay Bridge model data input can be performed in the Modeler portion of RM Bridge where an bridge specific Geometrical Preprocessor was created.

The main longitudinal reference is the Alignment attached to a structural Axis where the parametric Cross-Section is assigned creating structural Segments according to the Station.

The cables input can be done individually, thru Cable series, as in the documented example, or with Cable stayed wizard, as shown below.

Tags: cable stay wizard, RM Enterprise, Cable-Stayed Bridge, Geometrical Preprocessor, RM Bridge, RM Bridge Enterprise, RM Modeler, cable stayed wizard, CSB, RM Bridge CONNECT Edition, GP

CSB - Modeler

MarcosBeier — Thu, 11 Mar 2021 19:21:12 GMT

Revision 3 posted to LARS | LEAP | OpenBridge | OpenTunnel | RM Wiki by MarcosBeier on 3/11/2021 7:21:12 PM

A Cable-Stay Bridge model data input can be performed in the Modeler portion of RM Bridge where an bridge specific Geometrical Preprocessor was created.

The main longitudinal reference is the Alignment attached to a structural Axis where the parametric Cross-Section is assigned creating structural Segments according to the Station.

The cables input can be done individually, thru Cable series, as in the documented example, or with Cable stayed wizard, as shown below.

Tags: cable stay wizard, RM Enterprise, Cable-Stayed Bridge, Geometrical Preprocessor, RM Bridge, RM Bridge Enterprise, RM Modeler, CSB, RM Bridge CONNECT Edition, GP

CSB - Modeler

MarcosBeier — Thu, 11 Mar 2021 19:19:43 GMT

Revision 2 posted to LARS | LEAP | OpenBridge | OpenTunnel | RM Wiki by MarcosBeier on 3/11/2021 7:19:43 PM

A Cable-Stay Bridge model data input can be performed in the Modeler portion of RM Bridge where an bridge specific Geometrical Preprocessor was created.

The main longitudinal reference is the Alignment attached to a structural Axis where the parametric Cross-Section is assigned creating structural Segments according to the Station.

The cables input can be done individually, thru Cable series, as in the documented example, or with Cable stayed wizard, as shown below.

Tags: cable stay wizard, RM Enterprise, Cable-Stayed Bridge, Geometrical Preprocessor, RM Bridge, RM Bridge Enterprise, RM Modeler, CSB, RM Bridge CONNECT Edition, GP

CSB - Modeler

MarcosBeier — Thu, 11 Mar 2021 19:08:55 GMT

Revision 1 posted to LARS | LEAP | OpenBridge | OpenTunnel | RM Wiki by MarcosBeier on 3/11/2021 7:08:55 PM

A Cable-Stay Bridge model data input can be performed in the Modeler portion of RM Bridge where an bridge specific Geometrical Preprocessor was created.

The main longitudinal reference is the Alignment attached to a structural Axis where the parametric Cross-Section is assigned creating structural Segments according to the Station.

Tags: Cable-Stayed Bridge, Geometrical Preprocessor, RM Bridge, RM Bridge Enterprise, RM Modeler, CSB, RM Bridge CONNECT Edition, GP