You are currently reviewing an older revision of this page.
For RM Bridge any Finite Element Model three-dimensional bridge is an extension of the normal parametric beam model. Therefore, despite the additional input required to create the FEM bodies and store results, also some additional output is usual for creating the required Post-processing results.
On-screen FEM results, i.e., those shown at the main window, are quite straightforward, and only need to be specified for FEM results under View Options (after right click on the screen). The only additional detail that is different is the selection of Results direction that also could be selected under Diagram options (after right click on the screen). The Show faces options usually need to be simplified to allow users to plot only one direction instead of all three together, the results are the same, the visualization is what changes just with the intention to simplify the analysis of the results, as shown in the screenshot below that is different from the manual as here we show the transversal direction, that is commonly the interest in using the FEM option in these additional and more accurate analysis.