Deck Elevation Report

Document Information

Document Type: FAQ

Product(s): OPEN BRIDGE MODELER

Version(s): All

Original Author: Bentley Technical Support Group -VM

QUESTION: How to generate the Deck Elevation Report?

ANSWER:

 To get the deck elevation report at the Edge of the deck then you have to select

Report Type – Station/Offset/Elevation

Transverse Lines – Normal to Alignment.

Points Per Span – 10 -20 as per your project requirement.

• Under common References select “ Left/Right Deck Edge”.
• To get the Elevation at Along the Beam Path then Select the “Beam Path” Option.
• Then click on Generate to create report
• Then the program will Draw Perpendicular lines at every 10^th point the program will create Intersection Points.
• Then the elevations are shown at those points.
• If the Bridge is Skew then the user can generate the elevation report “Parallel to Start Support” or “Normal to alignment” as per the project requirement.