The RM Bridge Analyzer: Properties: Cross Sections: FE Mesh menu options displays elements and nodes of the Finite Element mesh of the cross-section. Each cross-section is subdivided into 9-noded Finite Elements. The mesh is used for calculating the cross…

OBD CE 2022 Release 1 and RM Bridge v11.14 is now able to compute and allow access to shell forces, stresses, and displacement results corresponding to integrals of lead components in a finite element model, after a live load analysis is performed. …

At RM Bridge inside OpenBridge Designe r, at Modeler , in the Cross-section creation users have the opportunity to generate an FE-mesh. Though, the connections between elements must obey specific very basic FEM rules: Corner nodes must only connect…

The FEM is based on the element's full bodies and it needs a set of additional definitions and subfunctions to display these complex FEM results. Usually, the integral results for the full overall cross-section are automatically created and Lines could…

For RM Bridge any Finite Element Model three-dimensional bridge is an extension of the normal parametric beam model. Therefore, despite the additional input required to create the FEM bodies and store results, also some additional output is usual for…