In XM and v8i the 'Apply Part' tool was located within the 'TF Change Attributes' toolbar.

In AECOsim Building Designer it is now part of the 'Change Form Attributes' toolbar.

This is also available in the ‘Main Building’ tools at the top of the Building Designer Task Interface, under the Change Attributes tool (shortcut 5).

The new Apply Part tool gives you the ability to…

In Bentley Architecture (or any of the building products) if detailed information about the element is needed you can do so by using the Building Element Information tool,  then select the element.  In the Building Information dialog you will find tabs that display different types of element data.   Also, by selecting the “More Info” button from the Building Element Info dialog the element’s attributes can…

AECOsim Building Designer allows for an easier, more intuitive process of creating Drawing Views
when comparing it to V8i SS1 Building applications.    

1. First, open the Detailing Symbols
   toolbox from the Tools pulldown menu or Drawing Composition interface menu in
   AECOsim Building Designer.
2. To create a Drawing View Floor Plan, click on the Place Plan Callout tool in the Detailing Symbols
   toolbox, and create a section…