AECOsim Building Designer V8i should not be installed on the same workstation as an existing AECOsim Building Designer V8i v08.11.xx Technology Preview (“beta”) release. Installing AECOsim Building Designer V8i over an existing AECOsim Building Designer V8i v8.11.xx installation can cause incompatibilities and data loss. You must uninstall the beta release, and then install the commercial release.
To Create…
There are few ways to access the Place Section Callout tool: From the Building Designer Task Interface simply go to the Main task group and select the Place Section Callout Icon as shown below, choose the same icon from the Drawing Composition task group, or choose Building Designer > Drawing Composition > Place Section Callout from the pull-down menus. The Callout tools can also be opened as a standalone toolbox…
When Importing a RAM Structural System file (.RSS) into AECOsim Building Designer, the process allows you to automatically generate Saved Views of each floor along with Sheet Models with each Saved View attached.
To access the RAM Import command:
Note: In order for the process to automatically generate the Saved Views and Sheet Models the desired Drawing Definition Templates must be selected in the Drawing Setup…
In order to run AECOsim functionality within Generative Components you will need to download and install the Generative Components Extension, not the standalone version.
During the installation you will be prompted to select which application you would like to apply the Extension. Select AECOsim Building Designer, and then Next.
Once the install is complete launch Generative Components and you should find Building…