Upcoming BIM Modeler Quickstarts for AECOsim Building Designer, CONNECT Edition!

Join Bentley's BIM Modeler QuickStarts for AECOsim Building Designer CONNECT Edition and stay up to date with BIM technology. In three easy sessions, you will get an introduction to the AECOsim BIM workflow from starting a new project WorkSet, modeling the basic geometry of a small commercial building, and ultimately generating drawings and schedules.

These hands-on, instructor-led courses are AIA CES registered and approved, so you can earn up to six continuing education credits per QuickStart. Note that you must register separately for each class.  All classes are a benefit of your Select Subscription.

Architectural - BIM QuickStart

Tuesday, December 5th - BIM QuickStart A101: Modeling Walls, Doors, and Windows 

  • See how to set up a new project WorkSet, and learn to model walls, doors, and windows 

Wednesday, December 6th - BIM QuickStart A102: Modeling Interior Floors and Roofs 

  • Learn how to model a stair, place a ceiling grid, model a sloped roof, and more!

Thursday, December 7th - BIM QuickStart A103: Creating Architectural Drawings and Schedules 

  • Create a Drawing Composite Model and then create a floor plan and building section

 

Structural - BIM QuickStart

Tuesday, December 12th - BIM QuickStart S101: Modeling Structural Frames

  • See how to set up a new project WorkSet, and learn to model steel and concrete columns and beams.

Wednesday, December 13th - BIM QuickStart S102: Modeling Slabs and Foundations 

  • Learn how to model a slabs, spread footings, and more!

Thursday, December 14th - BIM QuickStart S103: Creating Structural Drawings 

  • Create a Drawing Composite Model and then create a framing plan and building section.

 

Mechanical - BIM QuickStart

Tuesday, December 19th - BIM QuickStart M101: Modeling Equipment and Ductwork

  • See how to set up a new project WorkSet, and learn to model an air handling unit and the main supply and return ductwork.

Wednesday, December20th - BIM QuickStart M102: Modeling Diffusers, Grilles and Branches 

  • Learn how to model diffusers, grilles and branches.

Thursday, December 21st - BIM QuickStart M103: Creating Mechanical Drawings 

  • Create a Drawing Composite Model and then create a mechanical plan and section.