ABD SS5 - 08.11.09.747Drawing Extractions - Generate Centerlines
Has anyone ever seen a mix up with centerline linestyles upon extracting a file? The image below shows an example of our firewall linestyles. One diamond represents a 1HR wall and two diamonds represents a 2HR wall.
If I start a new file, they extract fine. On one problem file, when extracting the plan with generate centerlines in the cut plane tab, the linetypes are reversed - one diamond for 2HR and two diamonds for 1HR. All I can think of that is different is I changed the family/part settings after the walls were created in the file. I tried reapplying the part settings and the information shows everything is fine. However, the extration result does not.
Ustn since 1988SS4 - i7-3.45Ghz-16 Gb-250/1Tb/1Tb-Win8.1-64bEric D. MilbergerArchitect + Master Planner + BIMSenior Master Planner NASA - Marshall Space Flight CenterThe Milberger Architectural Group, llc
Mark Mates - BIM Manager - Mason & Hanger