The tread/riser finish pieces are taken away from the initial stair - should come on top of substrate... This means right now the landing concrete is level with the finish of last tread... Any workaround?
Hi Chris, If you are talking about controlling landings of U-shaped stairs (which I can't really recognise from the screen capture) than unfortunately that is not controllable. It is not possible yet to add a finish on top of the landing, like you can do it for steps. The Constraints were suggested by me because I thought you had the landing created separately. The workaround would be creating the landing and stairs separately. Landing could be 2 different types of slabs (i.e. concrete and finish). However, we are enhancing the stair tool for future releases of AECOsim. HTH