• State Suggested Answer
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 89 subscribers
  • Views 1097 views
  • Users 0 members are here

Auto deduct/trim

chinwoonglee
Offline

Dear Bentley,

Kindly assist how we go about that the architectural elements such as brickwall,plaster and etc could be auto deduct/ trim when they meet/interface with the structural elements such as beam,slab,column and etc.

regards,

Conny Chang

Parents
  • 0 Offline

    They would not trim to those elements. They could Unify to those, but even then typically you would have an expansion or construction joint like where a oclumn meets a floor of the same material.

    Now you can use tools like extend wall and that would happen. But there is not a way (liek the "T" Wall Tool) for a wall to be "T'd" into a structural element.

    Ustn since 1988
    SS4 - i7-3.45Ghz-16 Gb-250/1Tb/1Tb-Win8.1-64b

    Eric D. Milberger
    Architect + Master Planner + BIM
    Senior  Master Planner NASA - Marshall Space Flight Center

    The Milberger Architectural Group, llc

Reply
  • 0 Offline

    They would not trim to those elements. They could Unify to those, but even then typically you would have an expansion or construction joint like where a oclumn meets a floor of the same material.

    Now you can use tools like extend wall and that would happen. But there is not a way (liek the "T" Wall Tool) for a wall to be "T'd" into a structural element.

    Ustn since 1988
    SS4 - i7-3.45Ghz-16 Gb-250/1Tb/1Tb-Win8.1-64b

    Eric D. Milberger
    Architect + Master Planner + BIM
    Senior  Master Planner NASA - Marshall Space Flight Center

    The Milberger Architectural Group, llc

Children
No Data
Communities
Support and Services
Training and Learning
Social Media