Auto deduct/trim

Question

Dear Bentley, 
 Kindly assist how we go about that the architectural elements such as brickwall,plaster and etc could be auto deduct/ trim when they meet/interface with the structural elements such as beam,slab,column and etc. 
 regards, 
 Conny Chang

Eric Milberger · Answer

They would not trim to those elements. They could Unify to those, but even then typically you would have an expansion or construction joint like where a oclumn meets a floor of the same material. Now you can use tools like extend wall and that would happen. But there is not a way (liek the "T" Wall Tool) for a wall to be "T'd" into a structural element.