Change & Add Door Type, Door Materiel, Door Finish, Hardware Type & etc

Hi The best is to create the predefined list property and connect it to the catalog type.
Otherwise you could change the delivered property type.

these lists are held in the property definition, they can be accessed as follows

From the Building Designer tab > Datagroup - Building Components > Open Definition Editor.

scroll down to door and expand you will see that some of the definitions are lists, you can add to the list here. but also note that the box next to extendable may be ticked, this means that the list can be added to at the catalogue interface by the users, if you wish to restrict the user adding to the list then leave this box blank.

Also, see if this Wiki article might help: communities.bentley.com/.../12646.datagroup-definition-list-values

Thank you for answer. good help for me.

That's good news!