Multi-building Site

Hello all:

Currently, I'm using ABD SS5.  I've been working on drawing up, in 3D a medium size site that has a number of buildings on it.  Some of the buildings are connected, and some are independent.  Work on this project has spanned the past 15 years.  Yes, I've gone through a number of MS upgrades.

Is it possible to back fit BB-Floor Manager to these existing designs?

Thanks for the help.

Parents
  • There are probably several ways.
    I would start by simplifying the set were things are broken down into reference files.
    Then you can apply Floor Manager to the entire set and with a floor set aside for each

    I do it this way as I like to WORK with the model in an x-y direction and in the Mass Model in a True ACS.

    Ustn since 1988
    SS4 - i7-3.45Ghz-16 Gb-250/1Tb/1Tb-Win8.1-64b

    Eric D. Milberger
    Architect + Master Planner + BIM

    Senior  Master Planner NASA - Marshall Space Flight Center

    The Milberger Architectural Group, llc

Reply
  • There are probably several ways.
    I would start by simplifying the set were things are broken down into reference files.
    Then you can apply Floor Manager to the entire set and with a floor set aside for each

    I do it this way as I like to WORK with the model in an x-y direction and in the Mass Model in a True ACS.

    Ustn since 1988
    SS4 - i7-3.45Ghz-16 Gb-250/1Tb/1Tb-Win8.1-64b

    Eric D. Milberger
    Architect + Master Planner + BIM

    Senior  Master Planner NASA - Marshall Space Flight Center

    The Milberger Architectural Group, llc

Children
No Data