Door in space

Make sure that you don't have any doors with a frame in one wall and a swing through another as shown here:

I'm having the same problem. 1 door between to spaces and it "belongs" to both spaces. Is there something else to take into account when building the spaces or placing the doors to get only 1 space per door?

Anyone?

FOR ME THIS WORKS
The Door data seems to be tied from the center of the frame to the swing
If the SPACE is defined within your room. Defined by the interior surfaces of the space then the door should only show up as part of that space.

FOR ME THIS WORKS
The Door data seems to be tied from the center of the frame to the swing
If the SPACE is defined within your room. Defined by the interior surfaces of the space then the door should only show up as part of that space.

I can't seem to make it work. If the frame thickness is set to match wall, it appears on both spaces. In some cases if I make this value smaller, then it reports ok. But in other cases not even reducing the frame thickness works. This is weird.
It would be nice if someone from Bentley could elaborate a little bit on how are the door identified as being part of the space. Is the position of the geometric center? Is there some other definition if it is a paz door, like a segment with a specific name?

I'm using SS6 by the way.

There is more! We've used some RFA content just to place tables and chairs. For some reason the chairs are reported correctly in the spaces, but the tables do not appear at all.