Does anybody use the new Grid System Tool in AECOsim SS6?
What is your experience with the new Grid System?
I have never used the old Grid System Tool up to SS5. We are used to draw different Grid Models and reference it to 3D Models and 2D Drawings.
So I tested the new Grid System to find out its possibilities and if it's easier to use than our method with references.
But my experience is that there are a lot of missing and unconvenient/impractical issues.
My result in testing the New Grid System is that it's much better than the previous Grid System. Especially the Sketch Grid Tool is a big improvement.But there are still some enhancements to do. Grids in Elevation/Section Views as it is, is not usable for us.
Regards
Christian Mittermeier
We use the following Software:
WIN7-64bit (German)ProjectWise SS4 08.11.11.590 EnglishMicroStation SS3 08.11.09.459 EnglishAECOsim SS6 08.11.09.829 EnglishDataset NM 08.11.09.822 customized
please note that auto annotations is usually off to avoid long load times.
it would good to have a keyin to selectively update the grids only... And provide a button in the BV panel.
That will be this button in the Ribbon:
See help topic "Refresh Automatic Annotations" for the associated key-ins.
Marc