What is the best way to create 2D drawings in AECOSIM ss6 (with member labels and gridline)

The recommended workflow for most cases would be Drawing Composition; i.e., Drawing Views. Drawing (Extraction) Manager is a much older technology that while viable, is a much different process and not real-time in any fashion. Plus there haven't been any development changes or enhancements for a few years now since DVs are our direction forward.

I would first focus on the stumbling blocks you're finding in the DV workflow and go from there. Can you elaborate on those specific aspects? I think you'll find most users have been and are still doing the things you've described so there must be something more to it.

The recommended workflow for most cases would be Drawing Composition; i.e., Drawing Views. Drawing (Extraction) Manager is a much older technology that while viable, is a much different process and not real-time in any fashion. Plus there haven't been any development changes or enhancements for a few years now since DVs are our direction forward.

I would first focus on the stumbling blocks you're finding in the DV workflow and go from there. Can you elaborate on those specific aspects? I think you'll find most users have been and are still doing the things you've described so there must be something more to it.

For my 1 cent

1. Design Model -
   1. 3d models referenced into one master model -
   2. create Drawing Composition (which are smart saved views)
2. Drawing Model -
   1. refreence Design Model Saved View -
   2. Edit Model Name -
   3. Annotate the drawing -
   4. Create a Saved view for next step  $ sv=$(basename(_DGNFILE)  
      1. This creates a saved view where your model name is then saved to be used as your title name.
3. Sheets -
   1. Ref your Drawing Models and place titles -
   2. add schedules 
   3. etc

Thank you erik and steve,

I found now the problem why whenever i try to manipulate in the model the drawing in the sheet doesn't update. because I'm using not correct seedfile, I must choose elevation_view-seed for detail puposes instead of other seed.

Glad this information helped!

Yes, choosing the correct/applicable Drawing Seed is critical to getting the expected results. Glad to see you were able to work that out!